Chimney Chase Covers Near Hempstead

The Importance Of A Chimney Chase Cover?

The chase cover (or chase pan) is the square or rectangular part of aluminum that’s fitted to function securely on top of the chimney chase, helping to keep water and other environmental conditions out. A chimney chase cover is a chimney cover that fits on top of the chase. Chimney chase covers are similar to a metal chimney crown. Chimney chase covers are normally also referred to as chase pans or chase tops. Chase tops are only found on chases connected to factory-engineered fireplaces. The four main selections for chimney chase tops are aluminum, stainless steel, galvanized steel and copper. Each of these products has its pluses and cons.

Aluminum is a softer metal and might not hold up as well against the crazy factors. Aluminum is incredibly reliable, especially if a homeowner live in an area that sees a ton of expensive weather. However, the downside to stainless steel is that a steel chimney chase cover is high-priced. Galvanized steel could most certainly be your budget option. Galvanized steel rusts easily, so you should have to replace the chimney chase cover within a few years. Copper is commonly the most costly one. Not only does the chimney chase cover hold up very well, but the copper shade adds a nice, visually appealing touch.

Do I Need My Chimney Chase Cover fixed?

Almost always, a hole would let things in: that’s why an owner requires a chimney chase cover. While water certainly doesn’t mix well with fire, a chase cover goes far beyond simply keeping a roaring fireplace going. Continuous leaks of water from rain and snow, plus other issues, might eventually cause structural leaks. Although chimney chase covers are serviceable, preventative resources – chimney chase covers don’t last forever.

The most familiar cause of weakening comes from deterioration and rust. These two things can be easily spotted by reddish-brown stains around the top of a chase. Once rust starts, the chimney chase cover only gets worse. Of course, not all of us have the skill or resources to climb teetering on our roofs to check the chimney cover on a regular basis. Professionals should come out to the home once a year to do a thorough check of achimney structure. An inspector could be able to easily tell if the chimney chase cover requires to be replaced. A problematic chimney chase cover should cause leaks. So, if you’re finding water in a fireplace, there’s a good chance your home’s cover is taking on rust or corrosion.

Chimney Chase Cover Issues To Check For

A chimney chase cover is a necessity to ensure the top of the chimney is watertight. A chimney chase is a structure that is most regularly constructed to hide an ugly vent pipe running up the side of a home or through the roof. If a existing chimney chase cover is starting to deteriorate, it would be a good idea to replace the chimney chase cover sooner rather than later to avoid additional damage that would be caused by a leak.

The top of the cover should have cross breaks – which should remove all the water off the top of the chimney. If you could see rust stains running down the siding of the chimney, it’s likely the rust was caused by the chase cover being old. By replacing a galvanized or rusty chase cover, a homeowner are adding value to your home.

Spotting Damaged Chimney Parts

Your chimney is a workhorse constantly exhaling smoke, fumes and other contaminants while you’re enjoying the warmth of your fireplace or wood stove. And when any of these components are missing or fail, the risk of chimney problems swells.

The chimney crown is the top level of the chimney. Due to its prime location, the chimney crown takes a lot of abuse from outside influences such as the weather and environmental conditions. While the crown seals most of the chimney, the flue is still exposed. So having a crown alone is not enough to keep all water and debris out of the chimney.

The structural housing between the roof line and the chimney crown is the chase. The chase cover is a steel or aluminum square or rectangle-shaped cap that fits snugly on top of the chase to help shield the chimney chase cover from water leaks. It’s mounted above the crown and is manufactured using stainless steel to wrap the flue inside a cage-like mesh allowing smoke to vent, but stop outside product from getting into the chimney. Most homeowners can consider the chimney cap to be an indispensable safety device.

The chimney cap is of particular importance. Without it, the flue and fireplace are exposed to the external elements. These creatures (and other small debris) could clog the flue. This averts the escape of noxious fumes from a burning fireplace exposing residents in your home to detrimental, high levels of smoke and carbon monoxide. The force of a downdraft from an exposed flue may blast open fireplace doors pushing smoke, soot and ash into the room. Homeowners are urged to have their chimney cap, chimney crown and chase cover inspected annually.

The Chimney Cover Repair Contractors

Not everyone has the time or ability to be a chimney expert. Our technicians have the specialty, experience and commitment you requires to uphold your home’s chimney and avoid future ritzy damage and repairs.

Our experts follow the National Fire Protection Association’s guidelines to inspect chimneys, fireplaces and vents yearly to ensure safety and forestall problems and potential adverse complications. Not all chase covers are created equally! Unfortunately, not all covers feature this extremely beneficial design and people almost always don’t realize that until it’s too late and the leaks has already been done. Give Hempstead’s local roofing experts a call and let Expressway Roofing & Chimney handle all of the chimney’s demands.

CHIMNEY CHASE COVER INQUIRIES