Chimney Chase Covers Near Oakdale

What Are Some Chimney Chase Covers Choices?

The chase cover (or chase pan) is the square or rectangular part of copper that’s fitted to rest securely on top of your chimney chase, helping to keep water and other environmental conditions out. A chimney chase cover is a chimney cover that fits on top of the chase. Chimney chase covers are usually a rectangular-shaped piece that envelopes the top of your home’s chimney made of brick, wood, vinyl or metal. Chase tops are only found on chases connected to factory-installed fireplaces. The four main types for chimney chase tops are aluminum, stainless steel, galvanized steel and copper. Each of these materials has its pluses and detriments.

One of the major benefits of an aluminum chimney chase cover is that it won’t rust, which is good for the overall longevity of the product. Aluminum is incredibly reliable, especially if you live in an area that sees quite a bit of troublesome weather. However, the downside to stainless steel is that a steel chimney chase cover is high-priced. Galvanized steel may most certainly be the budget option. Galvanized steel rusts easily, so you should have to replace the chimney chase cover within a few years. Copper is assuredly the most upscale one. Not only does the chimney chase cover hold up very well, but the copper shade adds a nice, visually appealing touch.

Do I Need My Chimney Chase Cover Repaired?

Commonly, a hole would let things in: that’s why a homeowner needs a chimney chase cover. While water certainly doesn’t mix well with fire, a chase cover goes far beyond simply keeping the roaring fireplace going. Continuous leaks of water from rain and snow, plus other factors, could eventually cause structural trouble. Part of caring for a chimney is knowing when it’s time to get the chimney chase cover repaired.

If your home’s chase is damaged or has taken significant wear and tear, then the chimney chase cover demands to be replaced. These two things might be easily spotted by reddish-brown stains around the top of your home’s chase. Once rust initiates, the chimney chase cover only gets worse. So how will an owner know when you need to replace your chimney chase? Professionals should come out to your home’s home once a year to do a thorough check of your home’schimney structure. An inspector will be able to easily tell if your chimney chase cover needs to be replaced. A destroyed chimney chase cover should cause leaks. So, if you’re finding water in your fireplace, there’s a good chance your cover is taking on rust or corrosion.

Chimney Chase Cover Issues To Check For

If an owner have a wood-framed chimney chase, the owner most certainly need a chimney chase cover. A chimney chase is a structure that is most fgequently constructed to hide an ugly vent pipe running up the side of a home or through the roof. If you could catch it soon enough, a homeowner should avoid any additional high-priced repairs.

The top of the cover should have cross breaks – which can remove all the water off the top of the chimney. Replacing a chimney cover with a stainless steel cover will block further stains on the home. Expressway warranties chimney chase covers against rust and corrosion. By replacing a galvanized or rusty chase cover, a homeowner are adding value to your home.

Chimney Pan Inspections

It’s important for homeowners to not only understand the difference between a chimney crown, chase cover and chimney cap, but how chimney chase covers help shield their home and chimney. And when any of these components are gone or fail, the risk of chimney problems increases.

The chimney crown is the top level of the chimney. Due to its prime location, the chimney crown takes a lot of abuse from outside influences such as the weather and environmental elements. If damages to the crown are not discovered and resealed in a timely manner, the brick masonry may start to soften, decay and eventually break off the chimney.

The chase plays an important firefighting role in directing smoke and flying burning embers away from the roof. Depending on your home’s home construction, the chase may be built with brick, wood, vinyl or metal siding. The chase cover is a steel or aluminum square or rectangle-shaped cap that fits snugly on top of the chase to help safeguard the chimney chase cover from water obstacles. It’s mounted above the crown and is manufactured using stainless steel to wrap the flue inside a cage-like mesh allowing smoke to vent, but prevent outside product from getting into the chimney. Most homeowners could consider the chimney cap to be an indispensable safety device.

The chimney cap is of particular importance. Without it, the flue and fireplace are exposed to the external conditions. These creatures (and other small debris) might clog the flue. Also, uncapped chimneys are at a higher susceptibility for troublesome fire. With the right weather conditions, burning embers from the fireplace should be sucked through the chimney and land on your home’s roof and start a fire. Homeowners are urged to have their chimney cap, chimney crown and chase cover inspected yearly.

The Chimney Cover Repair Company

While an owner may certainly continue to learn, it’s best to contact a chimney sweep with any questions or concerns the owner will have. Our pros have the specialty, experience and commitment a homeowner demands to manage your chimney and avoid future ritzy complications and repairs.

We ask that an owner be careful whom an owner hire(s)! Homeowners should only allow the problematic chimney to be worked on by a knowledgeable CSIA Certified Chimney company who may provide you with the proper service and suitable parts for a system. Not all chase covers are created equally! Unfortunately, not all covers feature this extremely beneficial design and people almost always don’t realize that until it’s too late and the damage has already been done. Give Oakdale’s local roofing experts a call and let us handle all of a chimney’s needs.

CHIMNEY CHASE COVER INQUIRIES